Parts

Exchange Components

R1700G SLR Engine Exchange C11

All built with CAT parts

AD55 WHEEL GROUP EXCHANGE DNW/JNW X4 AD55 FRONT CRADLET AXLE HOUSING ASSEMBLY

Pt. No. 372-9203

Fitted with new final drive gears, plates and disc’s and park brake springs. Updated with late duo’s.

AD55B/775E HOIST CYLINDER EXCHANGE X2

Pt. No. 296-0738

AD55B SUSPENSION CYLINDER EXCHANGE X2

Pt. No. 341-8107

Pt. No. 207-1657

AD55B DIFF FRONT REAR EXCHANGE

Pt. No. 296-3973

Rebuilt with new crown wheel and pinion.

AD55B DIFF REAR EXCHANGE

Pt. No. 177-3897

R2900G DIFF FRONT & REAR EXCHANGE

Pt. No. 220-5673

Rebuilt with new crown wheel and pinion.

R2900G WHEEL GROUP EXCHANGE X8

Pt. No. 192-6972

Rebuilt with new final drive gears, plates, disc’s and park brake springs.

R2900G LIFT CYLINDER EXCHANGE X3

Pt. No. 303-4001

Bench tested.

R2900G GLK & JLK STEERING CYLINDER X2

Pt. No. 269-2948/173-9477

Bench tested

R1700G & R2900G TRUNNION SET EXCHANGE

R1700G WHEEL GROUP EXCHANGE X4

New brake discs, plates, springs, planetary gears, ring gear and sun gears.

R1700G FRONT & REAR DIFF

SN. 8XZ & SBR / Pt. No. 219-7996

Both are rebuilt with new crown wheel and pinion.

R1700G LIFT CYLINDER X3

SN. 8XZ & SBR / Pt. No. 269-0354/141-1974

Bench tested.

R1700G TILT CYLINDER X1

Pt. No. 269-1719/180-9367

Pressure tested

R1700G STEERING CYLINDER EXCHANGE X3

Pt. No. 269-1688/180-8500

R1700G TORQUE CONVERTER EXCHANGE

Pt. No. 180-0323

Rebuilt with pump mounts and outlet relief.

AD55 TORQUE CONVERTER EXCHANGE X1

Pt. No. 257-9737

Rebuilt with pump lock up and outlet relief ready to fit.

3 x R2900 G Wheel Groups

New brake discs, plates, springs, planetary gears, ring gear and sun gears in all wheel groups.

2 x R1700G Wheel Ends

All new brake discs, plates and springs.
Ring gears, planetary gears and sun gear new.

R2900G Differential

Bevel gear set new.

R2900G Tilt Cylinder

Rod is done in HVOF

R2900G Transmission

All new clutch discs through out.
Westrac dynoed.

2 x R1700 II Wheel Ends

New ring gears, planetary gears and sun gears
New discs, plates and springs.

R2900 and R2900G Torque Convertor

R1700 II and R1700G Torque Convertor

2 x R1700G Steer Cylinders

New brake discs, plates, springs, planetary gears, ring gear and sun gears in all wheel groups.

2 x R2900 and R2900G Steer Cylinders

New brake discs, plates, springs, planetary gears, ring gear and sun gears in all wheel groups.

Full Set of 966F Cylinders

R1700G Slip Diff

* R1700G, R2900G and AD55B exchange complete axles can also be made up for exchange.

We are constantly dismantling cat machinary for parts. All parts and components are for sale.

R2900G TRANSMISSION EXCHANGE X2

Pt. No. 226-9195

Rebuilt to OEM spec’s with CAT parts. Replaced friction discs and sun gears in all gears. All transmissions are Dyno tested ready to fit.

AD55B TRANSMISSION EXCHANGE

Pt No. 250-3216

Rebuilt to OEM spec’s with CAT parts. Replaced friction discs and sun gears in all gears. All transmissions are Dyno tested ready to fit.

R1700G S/No SBR TRANSMISSION EXCHANGE

Pt. No. 284-9078 (Will go into S/No 8xZ 164-3000 TRANS ARR)

Rebuilt to OEM spec’s with CAT parts. Replaced friction discs and sun gears in all gears. All transmissions are Dyno tested ready to fit.

R2900G JLK ENGINE EXCHANGE C15

Dyno tested with all CAT parts ready to bolt in.

New Parts

We carry a large array of new Cat parts from over the past 20 years. Along with this we also have various Komatsu, Toro, Volvo, Bell, Getman and Jacon parts.

Cat parts consist off:

Various engine parts
Transmission gears, housings, shafts, plates and discs
Differential gears and thrust plates
Wheel group gears
Brakes discs, seals, plates etc
Torque convertor components
Bushes, pins cups and cones
Undercarriage hardware, pins, covers, pads, caps etc
Centre hitch parts

Cab and component mounts
Bucket, control group pins and bushes
Panels and brackets for underground equipment
Steering components and seal kits
Hydraulic valves and seal kits
Drive shaft universals and yokes
Cab parts, hand controllers, pedals etc to
suite underground equipment
Electrical switches, various underground machine
harness’s, senders, etc

Machined Parts

To allow quick turn around of our component rebuilds we have a lot of parts that commonly require machining, when carrying out rebuilds. The main components are brake housings, brake pistons and differential centres for AD55B, 775E, R1700G, R1700II, R2900G and R1300. Other parts machined and ready to go are trunnions, pinion housings, rear supports, yokes and transmissions planetary housings.